The Mizuno ST200X Fairway fairway wood lie angles run from 58°–59.5°. The model’s lie progression spans 1.5° with lie steps of 0.5°–1°.
Fairway Wood • Released 2020
ST200X Fairway lie-angle fingerprint
What stands out about the ST200X Fairway lie setup?
The ST200X Fairway moves from 58° in the 3-wood to 59.5° in the 7-wood, a total lie progression of 1.5°.
The biggest single lie step is 1° between the 3-wood and 5-wood. Elsewhere the progression tightens to as little as 0.5°.
For fitting, the 5-wood at 59° is the most useful mid-set reference before checking the rest of the set.
For this fairway-wood family, lie fitting is more about strike pattern, delivery and address fit than creating a large left/right correction.
This head should be treated as fixed for lie unless Mizuno documents an indexed adjustment system for the exact version.
Factory lie angle chart
| Club | Lie | Step | Progression |
|---|---|---|---|
| 3-wood | 58° | — | Starting lie |
| 5-wood | 59° | +1° | Typical step |
| 7-wood | 59.5° | +0.5° | Typical step |
Lie progression by club
ST200X Fairway directional effect from a 1° lie error
Where to focus your dynamic lie test on the ST200X Fairway
Use 5-wood at 59° as the baseline because it gives a representative mid-set delivery check.
7-wood (21° loft), 5-wood (18° loft), 3-wood (15° loft). Their higher loft makes the same lie error more directionally visible.
3-wood (15° loft), 5-wood (18° loft). Use them to confirm the fit still works through the long end of the set.
Dynamic lie fit for the Mizuno ST200X Fairway
Use the published / historical lie reference as a fit baseline only.
Check centred impact, start line and delivery before blaming lie angle.
If the lie fit is clearly wrong, compare another head or a supported adjustable Mizuno model.
How to evaluate the Mizuno ST200X Fairway dynamic lie fit
Use the factory or neutral hosel position as the baseline.
Track repeated strike location rather than judging one heel or toe strike.
Separate start direction from curvature. A face / path problem is not automatically a lie problem.
Use indexed adapter settings where available. Do not bend a fixed wood or hybrid head.
Should the Mizuno ST200X Fairway be more upright or flatter?
A more upright fit may help when…
- A fitter confirms the stock head sits too flat dynamically
- Another factory / supported head produces better centre contact
A flatter fit may help when…
- A fitter confirms the stock head sits too upright dynamically
- Another factory / supported head produces better centre contact
Do not change lie just because…
- You plan to bend a fixed head
- You are using lie as a substitute for swing or strike work
- You have no repeatable baseline
Can the Mizuno ST200X Fairway lie angle be adjusted?
If this exact model has no supported indexed sleeve, treat the lie as fixed. A different head / build is the safer fitting route.
Why shaft length can change the lie fit
Playing length changes posture, hand height and delivery, so the same static lie can fit differently after a length change. Re-test dynamic lie after changing playing length rather than automatically adding or subtracting a fixed number of lie degrees.
Static lie is only the starting specification. Dynamic lie changes with delivery, shaft deflection, playing length and setup. Mizuno states that iron lie adjustment varies by model and material, while drivers and fairway woods are not bent for loft or lie. Before bending a club or rotating an indexed hosel, confirm the instructions for your exact model with Mizuno or a qualified fitter. Mizuno custom specifications.