The Mizuno MP-H5 Fli-Hi hybrid / utility lie angle is best treated as an approximate 59°–61° historical fitting reference. Exact lie can vary by loft, build and surviving historical specification, so use the range as a starting point and confirm the club dynamically.
Hybrid / Utility • Released 2014
MP-H5 Fli-Hi lie-angle fingerprint
What stands out about the MP-H5 Fli-Hi lie setup?
This model is best treated as a 59°–61° lie range rather than a precise club-by-club progression.
For this hybrid / utility head, lie fit sits between an iron and a wood: it can influence start direction and strike, but the head should not automatically be treated as bendable.
This head should be treated as fixed for lie unless Mizuno documents an indexed adjustment system for the exact version.
Lie angle reference
| Approximate historical lie range | 59°–61° |
|---|---|
| How to use it | Use this as a fitting reference, not as an exact model-by-model hosel chart. |
Lie range visual
Dynamic lie fit for the Mizuno MP-H5 Fli-Hi
Use the published / historical lie reference as a fit baseline only.
Check centred impact, start line and delivery before blaming lie angle.
If the lie fit is clearly wrong, compare another head or a supported adjustable Mizuno model.
How to evaluate the Mizuno MP-H5 Fli-Hi dynamic lie fit
Use the factory or neutral hosel position as the baseline.
Track repeated strike location rather than judging one heel or toe strike.
Separate start direction from curvature. A face / path problem is not automatically a lie problem.
Use indexed adapter settings where available. Do not bend a fixed wood or hybrid head.
Should the Mizuno MP-H5 Fli-Hi be more upright or flatter?
A more upright fit may help when…
- A fitter confirms the stock head sits too flat dynamically
- Another factory / supported head produces better centre contact
A flatter fit may help when…
- A fitter confirms the stock head sits too upright dynamically
- Another factory / supported head produces better centre contact
Do not change lie just because…
- You plan to bend a fixed head
- You are using lie as a substitute for swing or strike work
- You have no repeatable baseline
Can the Mizuno MP-H5 Fli-Hi lie angle be adjusted?
Use a fitter and model-specific Mizuno instructions before attempting any change.
Why shaft length can change the lie fit
Playing length changes posture, hand height and delivery, so the same static lie can fit differently after a length change. Re-test dynamic lie after changing playing length rather than automatically adding or subtracting a fixed number of lie degrees.
Static lie is only the starting specification. Dynamic lie changes with delivery, shaft deflection, playing length and setup. Mizuno states that iron lie adjustment varies by model and material, while drivers and fairway woods are not bent for loft or lie. Before bending a club or rotating an indexed hosel, confirm the instructions for your exact model with Mizuno or a qualified fitter. Mizuno custom specifications.