The True Temper Multi-Step Lite Regular is lighter than average for steel iron shafts at 3.46 oz (98 g), with 2.5° torque sitting near the middle of the group. Its mid launch / mid spin flight profile and stable / control-oriented character make it broad fit for smooth-to-medium tempos.
Iron shaft specifications
True Temper · Multi-Step Lite Regular · Iron Shaft
Material: SteelFlex: RegularWeight class: Mid-light (80-99.9 g)Flight: Mid launch / Mid spinTip: Taper tip
3.46 ozWeight
2.5°Torque
RegularFlex
MidLaunch
Material-matched benchmarks
How this shaft compares
Numeric comparisons use steel iron shafts in this database.
Weight
Below average
3.46 oz
Weight is below average among steel iron shafts in this database.
Torque
Typical
2.5°
Torque is typical among steel iron shafts with published numeric torque.
Balance point
Very low
51.5%
Balance point is very low among comparable steel iron shafts.
At a glance
Shaft profile
MaterialSteel
TipTaper tip
LaunchMid
SpinMid
StabilityStable / control-oriented
Tempo fitBroad fit for smooth-to-medium tempos
Overview
Model information
| Manufacturer | True Temper |
|---|---|
| Model | Multi-Step Lite Regular |
| Category | Iron Shaft |
| Catalog year | 2026 |
| SKU / code | TT0186 |
| MPF rating | 3B3H |
Full specifications
Technical details
Weight & flex
Weight3.46 oz (98 g)
Weight classMid-light (80-99.9 g)
FlexRegular
Torque2.5°
Bend pointlow
Kick pointLow / tip
Tip stiffnessmed/soft
Tip flexsoft
Butt flexmedium
Balance point51.5%
Build & dimensions
MaterialSteel
Tip typeTaper tip
Tip diameter0.355 in (9 mm)
Butt diameter0.6 in (15.2 mm)
Shaft lengthVaries by club
Length range41.0-37.0 (derived discrete set) in (104.1-94 (derived discrete set) cm)
Parallel tip lengthN/A — taper-tip design
Club rangeIron set, typically 2i/3i-PW
FinishChrome / polished steel
Flight & feel
LaunchMid
SpinMid
Trajectory / spin profileMid launch / Mid spin
Stability profileStable / control-oriented
Launch assistanceNeutral launch assistance
Feel profileCrisp steel feedback, stable through impact
Relative weight positionBelow average for steel iron shafts
Relative torque positionTypical for steel iron shafts
Player fit
Tempo fitBroad fit for smooth-to-medium tempos
Transition fitWorks best with smooth-to-moderate transitions
Control vs speed biasSlightly speed biased
Long-iron playabilityGood long-iron playability
Short-iron controlBalanced short-iron feel and control
Likely swing-speed fitModerate iron swings
Target playerBroad range of golfers seeking a balanced combination of feel, launch and control
Golfer fit summarySlightly speed biased; broad fit for smooth-to-medium tempos; mid launch / mid spin.