The PING i240 is a iron set launched around 2025. The set runs from 19° in the 3-iron to 45° in the pitching wedge, while standard lengths taper from 39 to 35.5 in.
Key specifications
Iron-by-iron specifications
Each documented club is shown on its own row so the set progression is easy to scan.
| Club | Loft |
|---|---|
| 3 | 19° |
| 4 | 22.5° |
| 5 | 26° |
| 6 | 29.5° |
| 7 | 33° |
| 8 | 37° |
| 9 | 41° |
| PW | 45° |
PING i240 build profile
Model information
| Launch year | 2025 |
|---|---|
| Club type | Iron set |
| Market | USA |
| U.S. status | current/listed by PING USA |
Stock components
| Shaft | PING AWT 3.0; ALTA CB Blue; additional custom options |
|---|
PING i240 FAQ
Does the PING i240 have much offset?+
The offset value is not reliably documented in this record.
Is the PING i240 lie angle upright or flat for PING?+
The lie value is not sufficiently documented for a useful same-type comparison.
Is the PING i240 long or short for its category?+
The length is not sufficiently documented for a useful same-type comparison.
How old is the PING i240?+
The audited record places its launch around 2025. That makes it roughly 1 years old in 2026. Condition, shaft integrity and whether the club was altered since new can matter as much as the original spec sheet on an older club.
What shaft was listed for the PING i240?+
The researched record lists PING AWT 3.0; ALTA CB Blue; additional custom options. That does not prove every surviving club has that shaft: custom orders and later reshafts are common, so check the actual shaft label before buying used.
Specification note: PING specifications can vary by generation, loft, shaft, market, fitting configuration and custom order. Historical models may be documented only by surviving catalog, retailer or observed-club evidence. Blank fields are intentionally left blank rather than guessed. Verify critical fitting or purchase details against an official PING specification source where available. Primary researched source.