The PING G700 is a iron set. The set runs from 20° in the 4-iron to 44° in the pitching wedge, while standard lengths taper from 38.875 to 35.5 in.
Key specifications
Iron-by-iron specifications
Each documented club is shown on its own row so the set progression is easy to scan.
| Club | Loft | Length | Bounce | Offset | Swingweight |
|---|---|---|---|---|---|
| 4 | 20° | 38.875 in | 5° | .29 in | D0 |
| 5 | 23° | 38.25 in | 6° | .26 in | D0 |
| 6 | 26° | 37.625 in | 7° | .23 in | D0 |
| 7 | 29.5° | 37 in | 8° | .20 in | D0 |
| 8 | 34° | 36.5 in | 9° | .18 in | D0 |
| 9 | 39° | 36 in | 10° | .16 in | D0.5 |
| PW | 44° | 35.5 in | 12° | .13 in | D2 |
PING G700 build profile
Model information
| Club type | Iron set |
|---|---|
| Market | USA |
| Handedness | RH/LH |
Head and design
| Face material / technology | C300 maraging steel face |
|---|
PING G700 FAQ
Does the PING G700 have much offset?+
The offset value is not reliably documented in this record.
Is the PING G700 lie angle upright or flat for PING?+
The lie value is not sufficiently documented for a useful same-type comparison.
Is the PING G700 long or short for its category?+
The length is not sufficiently documented for a useful same-type comparison.
Specification note: PING specifications can vary by generation, loft, shaft, market, fitting configuration and custom order. Historical models may be documented only by surviving catalog, retailer or observed-club evidence. Blank fields are intentionally left blank rather than guessed. Verify critical fitting or purchase details against an official PING specification source where available. Primary researched source.