Table of Contents
What is the Best Shaft for the PING G400 Max Driver?
The PING Tour 65 driver shaft is considered the best shaft for the PING G400 Max Driver.
PING G400 Max Driver Shaft Specs Chart
Benefit from the Ping G400 Max Driver Shaft specs chart before learning more about the options.
PING G400 Max Driver Shaft
PING Tour 65
Aldila X-Torsion Copper
PING G400 Max Driver Shaft Options
- PING Tour 65
- Alta CB55 Red
- Aldila X-Torsion Copper
PING Tour 65 driver shaft
The PING Tour 65 shaft is an excellent shaft if you are an intermediate golfer. Although the PING Tour 65 stiff is very similar to the regular one, it is better in various ways. Hence, stiff is more popular than other shaft flexes.
The PING Tour 65 is more stable than most competitors and has good dispersions. It is also a perfect choice for windy days since it has more trajectory. Also, these shafts are extremely low torque in comparison to others.
Alta CB55 Red driver shaft
Alta CB55 Red is a fantastic shaft for beginners and intermediates. However, many veteran golfers prefer this shaft too. This mid-trajectory shaft provides a counterbalance to offset the higher head weight.
It has an 8-gram plug at the end of the shaft. This plug can deliver more momentum. Furthermore, this engineering is extremely useful for many new golfers.
Aldila X-Torsion Copper driver shaft
The Aldila X-Torsion Copper Ping G400 driver shaft has an impressive counterbalance for heavier heads.
In addition, the X-Torsion shaft can benefit longer drive setups as well. Hence, many intermediate and veteran golfers prefer this shaft.
It has a very comfortable feel and a stable tip too. Also, it has a copper graphics design that suits well with the PING 400 driver. The sharp look and functional design of it make this shaft an excellent choice.
What is the Best Replacement Shaft for the PING G400 Driver?
Apollo Shadow – Stiflex is one of the best replacement shafts for the PING G400 Driver. You can easily mount it on your PING G400 driver with its preassembled adapter and grip.
PING G400 LST Driver Shaft Options
Take a look at some of the most popular PING G400 LST driver shaft options below:
- PING Tour 75
- Project X HZRDUS Yellow
PING Tour 75 driver shaft (G400 LST driver shaft)
PING Tour 75 is a perfect choice for beginners as well as veterans. Firstly, many golfers prefer this for LST since it offers an optimal trajectory.
It can increase face flexing for higher launches. Furthemore, it has an ultra-thin crown cast to optimize CG and MOI. Additionally, PING Tour 75 is durable and looks excellent.
Project X HZRDUS Yellow shaft (G400 LST driver shaft)
This yellow graphite wood shaft is a counterbalanced shaft. It also has a low spinning. So, it is very popular among golfers who prefer low spinning.
Furthermore, the Project X HZRDUS Yellow PING driver shaft comes in a perfect length which you can customize as well. It also has a durable and sturdy construction. Project X HZRDUS Yellow shaft is perfect for players with a smooth tempo.
What is the Best Shaft for the PING G400 SFT Driver?
Mitsubishi Kuro Kage Silver Dual-Core TiNi is the best shaft for the PING G400 SFT Driver. It offers comfort and reliable support for various kinds of golfers.
PING G400 SFT Driver Shaft Options
Here are the two best PING G400 SFT driveshaft options:
- Mitsubishi Kuro Kage Silver Dual-Core TiNi
- Alta Distanza
Mitsubishi Kuro Kage Silver Dual-Core TiNi (G400 SFT driver shaft)
Mitsubishi Kuro Kage Silver Dual-Core TiNi is an excellent shaft with an innovative design. This shaft by Mitsubishi’s has a TiNi blend (carbon fiber, elastic titanium nickel wire blend).
Furthermore, it delivers more power, control, and stability. The best part about this shaft is it is offers increased strength without adding more weight. Also, it is perfect if you want mid launching or mid to low spinning. Hence, beginners and intermediates can make good use of it.
Alta Distanza (G400 SFT driver shaft)
Alta Distanza is another amazing shaft for the PING G400 SFT driver shaft. It primarily offers maximum trajectory height with lightweight construction. Hence, we recommend it if you’re looking to improve your trajectory.
It also has an active tip that is 0.092 pounds shaft that offers greater trajectories with slower swing speeds. Additionally, the Alta Distanza drive shaft has a durable and innovative construction.
PING G400 Driver Shaft Length
The standard length for a PING G400 driver shaft is 45.25 inches to 45.75 inches. Some shafts are available in 46 inches and longer.
The Tour Length provides better accuracy than the standard length. Plus, the Tour Length is 45. 25 inches. The shaft length has increased over time since it was only 43 inches in the early 1990s. The increase in driver head season is the main reason behind the change.
Also, a longer shaft provides more yardage than a shorter shaft. Hence, many people prefer to buy longer shafts. This led to manufacturers making longer shafts.
So, if you’re looking for shafts that can provide you with more yardage, we suggest you go with the longest and most comfortable shaft.
PING G400 Driver Shaft Tip Size
The PING G400 driver shaft has a tip size of 0.335″
The tip size is the diameter of the tip of the shaft. This portion will generally be 0.0370 inches parallel, or 0.355 inches tapered.
You’ll have to match it with the inside diameter of the hosel of the golf club head. To measure the ID, you can use a fine tip gauge or contact the club retailer or manufacturer for the information.
PING G400 Custom Shaft Options
The best PING G400 driver custom shaft options enjoyed by golfers are the Mitsubishi Tensei CK Orange 60, Project X EvenFlow Black 75 and GD Tour AD IZ 7 Shaft.
- Mitsubishi Tensei CK Orange 60 shaft
- Project X EvenFlow Black 75 shaft
- GD Tour AD IZ 7 Shaft shaft
Usually, golfers with slow swings need more lofted drivers and more flexible shafts. Also, golfers with fast swing speeds need to require a low loft and a sturdy shaft.
Although a large number of people prefer stock shafts, custom shaft options for PING G400 are very popular. You can pick some of the best aftermarket shafts that are durable and serves what you need exactly.
Furthemore, aftermarket shafts are available in a wide range of customizable options in terms of length, size, weight, and flex. Also, it is available at prices ranging from 70 dollars to 500 dollars.