The PING ChipR Le is a chipper / specialty wedge. Key listed specs include 38.5° loft, 34 in length.
Key specifications
PING ChipR Le build profile
Model information
| Club type | Chipper / specialty wedge |
|---|---|
| Market | USA |
| U.S. status | current/listed by PING USA |
| Handedness | RH/LH |
Club specifications
| Loft options | 38.5° |
|---|---|
| Standard length | 34 in |
| Lie angle | 70° |
| Offset | 0.1 in |
| Bounce | 8° |
| Swingweight | D6 |
Stock components
| Shaft | PING Le Wedge 65g |
|---|
PING ChipR Le FAQ
Is the PING ChipR Le better suited to soft or firm turf?+
Bounce is not fully documented. Higher bounce generally resists digging in softer conditions; lower bounce usually sits tighter on firm turf.
What role does the PING ChipR Le loft fit?+
The loft record is incomplete, so a reliable bag-role comparison cannot be made from this row alone.
Is the PING ChipR Le bounce forgiving for a steep swing?+
The bounce figure is unavailable. For a steep delivery, enough effective bounce and sole width generally matter more than chasing a specific model name.
What shaft was listed for the PING ChipR Le?+
The researched record lists PING Le Wedge 65g. That does not prove every surviving club has that shaft: custom orders and later reshafts are common, so check the actual shaft label before buying used.
Specification note: PING specifications can vary by generation, loft, shaft, market, fitting configuration and custom order. Historical models may be documented only by surviving catalog, retailer or observed-club evidence. Blank fields are intentionally left blank rather than guessed. Verify critical fitting or purchase details against an official PING specification source where available. Primary researched source.