The Callaway Rogue ST Max OS Lite iron lineup runs from 22° to 43° across 7 factory loft options. The 7-iron is 31.5° and the highest-lofted option is the pitching wedge at 43°.
Rogue ST Max OS Lite Lofts & Loft Chart
Factory loft map and model-specific gap analysis
Rogue ST Max OS Lite Loft Chart
| Club | Loft | Loft Gap | Gap Read |
|---|---|---|---|
| 4i | 22° | — | — |
| 5i | 25° | 3° | Near model median |
| 6i | 28° | 3° | Near model median |
| 7i | 31.5° | 3.5° | Near model median |
| 8i | 35° | 3.5° | Near model median |
| 9i | 39° | 4° | Near model median |
| PW | 43° | 4° | Near model median |
What stands out about the Rogue ST Max OS Lite lofts?
Gap pattern: Median gap is 3.5°. Tightest: 4i→5i (3°), 5i→6i (3°). Widest: 8i→9i (4°), 9i→PW (4°).
Rogue ST Max OS Lite loft progression
The 31.5° 7-iron is the clearest single reference point for how this set is lofted. Loft helps explain distance structure, but it does not by itself predict launch, spin or carry.
Where are the tightest and widest loft gaps?
The tightest static gap is 3° between 4-iron and 5-iron. The widest is 4° between 8-iron and 9-iron. Those are the first transitions worth checking if real carry gaps look compressed or stretched.
Rogue ST Max OS Lite vs other Callaway iron lofts
This comparison uses the same benchmark club where possible and deliberately shows nearby lower, similar and higher lofts when available.
| Callaway Model | Benchmark Club | Loft | Difference |
|---|---|---|---|
| Rogue ST Max OS Lite | 7i | 31.5° | This model |
| Apex Ai150 | 7i | 31° | 0.5° lower loft |
| Edge | 7i | 32° | 0.5° higher loft |
| Apex 21 | 7i | 30.5° | 1° lower loft |
| Apex | 7i | 30° | 1.5° lower loft |
| Apex MB Raw | 7i | 33° | 1.5° higher loft |
What traditional iron lofts are the Rogue ST Max OS Lite closest to?
This is a static-loft comparison only; it does not mean the clubs launch, spin or carry the same.
| Callaway Club | Actual Loft | Closest Traditional Loft |
|---|---|---|
| 4-iron | 22° | 3-iron (~21°) |
| 5-iron | 25° | 4-iron (~24°) |
| 6-iron | 28° | 5-iron (~27°) |
| 7-iron | 31.5° | 6-iron (~31°) |
| 8-iron | 35° | 7-iron (~35°) |
| 9-iron | 39° | 8-iron (~39°) |
Which Rogue ST Max OS Lite club has each loft?
- 22° = 4-iron.
- 25° = 5-iron.
- 28° = 6-iron.
- 31.5° = 7-iron.
- 35° = 8-iron.
- 39° = 9-iron.
- 43° = pitching wedge.
Individual Rogue ST Max OS Lite loft answers
What loft is the Callaway Rogue ST Max OS Lite 4-iron?
The Rogue ST Max OS Lite 4-iron is 22°. It is the lowest-lofted option in this model.
What loft is the Callaway Rogue ST Max OS Lite 5-iron?
The Rogue ST Max OS Lite 5-iron is 25°. It has 3° more loft than the 4-iron.
What loft is the Callaway Rogue ST Max OS Lite 6-iron?
The Rogue ST Max OS Lite 6-iron is 28°. It has 3° more loft than the 5-iron.
What loft is the Callaway Rogue ST Max OS Lite 7-iron?
The Rogue ST Max OS Lite 7-iron is 31.5°. It has 3.5° more loft than the 6-iron.
What loft is the Callaway Rogue ST Max OS Lite 8-iron?
The Rogue ST Max OS Lite 8-iron is 35°. It has 3.5° more loft than the 7-iron.
What loft is the Callaway Rogue ST Max OS Lite 9-iron?
The Rogue ST Max OS Lite 9-iron is 39°. It has 4° more loft than the 8-iron.
What loft is the Callaway Rogue ST Max OS Lite pitching wedge?
The Rogue ST Max OS Lite pitching wedge is 43°. It has 4° more loft than the 9-iron.
Rogue ST Max OS Lite Loft Intelligence
These derived specs show how the numbered irons are structured instead of only repeating the factory lofts.
31.5° loft
vs ~35° traditional 7i
3.4° average
Moderately varied
Iron-only spacing: The tightest numbered-iron gap is 3° from 4i to 5i. The widest is 4° from 8i to 9i.
Progression shape: The long irons are more compressed at 3° average spacing versus 3.7° through the mid/short numbered irons.
Loft Consistency Score: 72.5/100. This derived score measures variation in numbered-iron loft gaps. A score of 100 means perfectly even static-loft spacing.
Spec note: Factory lofts can vary by model year, region, handedness or special configuration. Verify an exact club against Callaway documentation when a single degree matters for fitting, replacement or bending.