Callaway Diablo Octane Driver Specs (Loft | Length | Lie Angle)

The Callaway Diablo Octane Driver combines a 460 cc head, loft options of 8.5°, 9.5°, 10.5° and 11.5°, fixed hosel, a standard length of 45.5 in, and a listed swing weight of D2.

Callaway Golf Club Specifications

Driver • 2011 • RH/LH • Fixed hosel

Head size: 460 ccAvailable lofts: 8.5°, 9.5°, 10.5°, 11.5°Length: 45.5 inSwing weight: D2

Key specifications

DriverClub type

460 ccHead size

8.5°, 9.5°, 10.5°, 11.5°Available lofts

Fixed hoselLoft adjustability

45.5 inStandard length

D2Swing weight

Visual model specs

Built only from this model’s supplied specifications.

Loft options

4 available lofts spanning 8.5° to 11.5°.

8.5°

9.5°

10.5°

11.5°

Model spec snapshot

Representative numeric specifications from this model.

460ccHead

45.5 inLength

How the Callaway Diablo Octane Driver compares

This compares the baseline specification with other Callaway drivers in this database. Driver loft comparisons use the lowest stated loft.

Head size

460 cc

5% above avg

64th percentile

Lowest stated loft

8.5 °

7% below avg

19th percentile

Standard length

45.5 in

In line with avg

59th percentile

Head size460 cc

Low 215 ccAverage 439 ccHigh 460 cc

About 5% larger than the Callaway drivers database average. Around the 64th percentile for this field.

Lowest stated loft8.5 °

Low 8 °Average 9.2 °High 10.9 °

About 7% lower loft than the Callaway drivers database average. Around the 19th percentile for this field.

Standard length45.5 in

Low 43.28 inAverage 45.15 inHigh 45.86 in

Very close to the Callaway drivers database average. Around the 59th percentile for this field.

This model Callaway average

Club information

Manufacturer	Callaway
Model	Diablo Octane
Club type	Driver
Release year	2011

Head, loft and weighting

Head size	460 cc
Available lofts	8.5°, 9.5°, 10.5°, 11.5°
Loft adjustability	Fixed hosel
Swing weight	D2

Shaft, grip and setup

Standard length	45.5 in
Stock shaft options	Project X graphite shaft
Stock grip	Callaway stock grip
Hand availability	RH/LH

Construction and forgiveness

Face / material / construction	Forged composite crown and sole with a chemically milled Hyperbolic Face Cup; titanium face/cup construction
MOI / forgiveness information	High-MOI, perimeter-weighted design intended to increase forgiveness and stability on off-center hits

Data note: Golf club specifications can vary by loft, shaft, flex, hand, set composition and market. Where the source row lists multiple configurations, the complete supplied value is retained in the tables. Representative benchmark charts normalize multi-club sets to a consistent comparison point.