The Aerotech SteelFiber 95cw .355 Stiff is heavier than average for graphite iron shafts at 3.35 oz (95 g), while its 2.4° torque is on the lower side. Its mid launch / mid-low spin flight profile and stable / control-oriented character make it best suited to medium or medium-fast tempos.
Iron shaft specifications
Aerotech · SteelFiber 95cw .355 Stiff · Iron Shaft
Material: GraphiteFlex: StiffWeight class: Mid-light (80-99.9 g)Flight: Mid launch / Mid-low spinTip: Taper tip
3.35 ozWeight
2.4°Torque
StiffFlex
Low-MidLaunch
Material-matched benchmarks
How this shaft compares
Numeric comparisons use graphite iron shafts in this database.
Weight
Above average
3.35 oz
Weight is above average among graphite iron shafts in this database.
Torque
Below average
2.4°
Torque is below average among graphite iron shafts with published numeric torque.
Balance point
Very low
50.5%
Balance point is very low among comparable graphite iron shafts.
At a glance
Shaft profile
MaterialGraphite
TipTaper tip
LaunchLow-Mid
SpinMid-Low
StabilityStable / control-oriented
Tempo fitBest suited to medium or medium-fast tempos
Overview
Model information
| Manufacturer | Aerotech |
|---|---|
| Model | SteelFiber 95cw .355 Stiff |
| Category | Iron Shaft |
| Catalog year | 2026 |
| SKU / code | AT0015IE |
| MPF rating | 4B1H |
Full specifications
Technical details
Weight & flex
Weight3.35 oz (95 g)
Weight classMid-light (80-99.9 g)
FlexStiff
Torque2.4°
Bend pointmid/high
Kick pointHigh
Tip stiffnessmed/firm
Tip flexfirm
Butt flexmedium-firm
Balance point50.5%
Build & dimensions
MaterialGraphite
Tip typeTaper tip
Tip diameter0.355 in (9 mm)
Butt diameter0.6 in (15.2 mm)
Shaft length41 in (104.1 cm)
Length rangeSingle-length blank; trim to club
Parallel tip lengthN/A — taper-tip design
Club rangeIron set, typically 2i/3i-PW
FinishPainted composite / graphite finish (varies by model) (family-based)
Flight & feel
LaunchLow-Mid
SpinMid-Low
Trajectory / spin profileMid launch / Mid-low spin
Stability profileStable / control-oriented
Launch assistanceNeutral launch assistance
Feel profileVibration-damping graphite feel, stable through impact
Relative weight positionAbove average for graphite iron shafts
Relative torque positionBelow average for graphite iron shafts
Player fit
Tempo fitBest suited to medium or medium-fast tempos
Transition fitSuited to moderate-to-firm transitions
Control vs speed biasSlightly speed biased
Long-iron playabilityGood long-iron playability
Short-iron controlBalanced short-iron feel and control
Likely swing-speed fitModerate-fast to fast iron swings
Target playerPlayers seeking flatter trajectory, tighter dispersion and a firmer tip feel
Golfer fit summarySlightly speed biased; best suited to medium or medium-fast tempos; mid launch / mid-low spin.