The gasoline Club Car Precedent Villager 2 people mover spans fuel-system generations, so hose routing depends on model year and engine. Identify the exact gasoline configuration before applying low-pressure or EFI routing.
Precedent Villager 2 • Fuel pump hose routing
Precedent Villager 2 fuel-line routing at a glance
Identify first
Find the exact year, engine and serial/model code.
Earlier low-pressure
If your year is carbureted, trace tank → pump → carburetor plus the pulse line.
Later EFI
If your year is EFI, trace the tank pump → pressurized line → injector/throttle body.
Order by generation
Match hose and connectors to the exact system.
How the Club Car Precedent Villager 2 fuel lines are routed
Common Precedent Villager 2 hose-routing mistakes
Wrong-generation diagram
The same model name can span different gasoline engines and fuel systems.
Pulse routing on an EFI cart
EFI electric pumps do not use a crankcase pulse hose.
EFI hose on an older diagram
Do not assume newer connectors, pressure ratings or module layout apply to older carbureted versions.
Missing year/serial check
Use the exact serial/model code before ordering hose, fittings or pump parts.
Precedent Villager 2 fuel hose and line layout
Pump/system: Legacy carbureted or later ECH440 by serial range.
Engine/system: Generation-dependent gasoline.
Routing: Older FE350/carbureted routing differs from later ECH440 gasoline routing; verify serial prefix/year.
Applies to: Multiple gasoline generations.
Model-specific note
Club Car's serial-prefix directory shows gasoline Precedent-family applications across older FE350 and later ECH440 generations.
Club Car Precedent Villager 2 fuel hose FAQ
Does every gasoline Club Car Precedent Villager 2 use the same fuel-line routing?
No. The Club Car Precedent Villager 2 name spans gasoline generations, so the correct routing depends on model year, engine and fuel-system type.
How do I know which Club Car Precedent Villager 2 hose diagram to use?
Identify the exact serial/model code and gasoline engine first. Then use the matching official parts or service diagram.
How is an older carbureted Club Car Precedent Villager 2 typically routed?
Where a diaphragm-pump system is fitted, the usual path is tank to pump inlet, pump outlet to carburetor, plus a separate engine pulse/impulse line.
How is an EFI Club Car Precedent Villager 2 routed?
An EFI version uses a tank-area electric pump with a pressurized fuel line to the injector/throttle-body system; it does not use a crankcase pulse hose.
Can I copy routing from a different-year Club Car Precedent Villager 2?
Not safely without verification. Pump type, connectors, pressure rating and line routing can change even when the model name stays the same.
What should I verify before replacing Club Car Precedent Villager 2 fuel hose?
Confirm the exact year/engine, fuel-system type, hose pressure rating, connector style, seals, routing clips and fuel compatibility.
Fuel-line routing, pump type, connectors and pressure requirements can vary by model year, engine and serial range. Before disconnecting or replacing any line, confirm the routing in the official owner, operator, parts or service manual for your exact Club Car Precedent Villager 2. For current documentation, visit the official manufacturer website.