The gasoline E-Z-GO Refresher Oasis beverage cart uses an electric EFI fuel pump with a pressurized supply line from the tank area to the EFI system. There is no crankcase pulse hose in the EFI pump circuit.
Refresher Oasis • Fuel pump hose routing
Refresher Oasis fuel-line routing at a glance
No pulse hose
EFI pump is electrically driven.
Use EFI-rated parts
Match hose, seals and connectors to the system.
Leak after service
Check O-ring, quick-connect and retainer.
Keep factory path
Avoid heat, abrasion and moving parts.
How the E-Z-GO Refresher Oasis fuel lines are routed
Common Refresher Oasis hose-routing mistakes
Low-pressure hose on EFI
Use EFI-rated hose, fittings and seals; low-pressure carburetor hose may be unsuitable.
Damaged quick-connect
A damaged retainer or O-ring can leak under pressure.
Kinked pressure line
A restriction can reduce fuel pressure and cause hesitation or no-start symptoms.
Poor factory routing
Lines or wiring routed near exhaust heat or moving parts can be damaged.
Refresher Oasis fuel hose and line layout
Pump/system: EFI electric pump.
Engine/system: Modern Textron gasoline EFI.
Routing: Tank-area electric pump → pressurized EFI fuel line → injector/throttle-body system.
Applies to: Current gasoline EFI.
Model-specific note
Current Refresher Oasis gasoline applications use the modern Textron EFI architecture; verify the exact model-year connector and line routing.
E-Z-GO Refresher Oasis fuel hose FAQ
How is the E-Z-GO Refresher Oasis EFI fuel line routed?
On gasoline versions of the E-Z-GO Refresher Oasis beverage cart, the tank-area electric pump supplies the EFI system through a pressurized line toward the injector/throttle-body assembly.
Does the E-Z-GO Refresher Oasis EFI pump use a pulse hose?
No. The EFI pump is electrically driven, so it does not use the crankcase pulse hose found on older diaphragm-pump systems.
Can a kinked fuel line cause E-Z-GO Refresher Oasis problems?
Yes. A restricted pressurized line can reduce fuel delivery and cause hard starting, hesitation or power loss.
Can ordinary low-pressure hose be used on a E-Z-GO Refresher Oasis EFI system?
Use fuel line, fittings and seals rated for the exact EFI pressure and fuel type specified for the vehicle.
Why can a E-Z-GO Refresher Oasis fuel line leak after pump service?
Check the quick-connect, O-ring/seal, retaining clip and line condition. Do not operate the vehicle with a pressurized leak.
How should the E-Z-GO Refresher Oasis EFI fuel line be secured?
Preserve the factory clips and routing so the line remains clear of exhaust heat, sharp edges and moving components.
Fuel-line routing, pump type, connectors and pressure requirements can vary by model year, engine and serial range. Before disconnecting or replacing any line, confirm the routing in the official owner, operator, parts or service manual for your exact E-Z-GO Refresher Oasis. For current documentation, visit the official manufacturer website.