E-Z-GO Express L6 Fuel Pump Hose & Line Routing

The gasoline E-Z-GO Express L6 golf cart spans fuel-system generations, so hose routing depends on model year and engine. Identify the exact gasoline configuration before applying low-pressure or EFI routing.

E-Z-GO Fuel Hose Guide

Express L6 • Fuel pump hose routing

Model-year specificRouting

Earlier low-pressureEarlier gas

Later EFILater gas

Verify yearFirst step

Express L6 fuel-line routing at a glance

Earlier gasolineCheck the model-year low-pressure layout

Later gasolineCheck the model-year EFI layout

Exact year / engineChoose the correct diagram

Do not combine routing from different generations

Identify first

Find the exact year, engine and serial/model code.

Earlier low-pressure

If your year is carbureted, trace tank → pump → carburetor plus the pulse line.

Later EFI

If your year is EFI, trace the tank pump → pressurized line → injector/throttle body.

Order by generation

Match hose and connectors to the exact system.

Model-year specificEarlier low-pressureLater EFIYear matters

How the E-Z-GO Express L6 fuel lines are routed

Identify the exact model year, serial/model code and gasoline engine before moving any hose or fuel line.

If the vehicle is an earlier carbureted version, trace tank supply → pump inlet → pump outlet → carburetor and identify the separate engine pulse/impulse line when fitted.

If the vehicle is EFI, trace the tank-area electric pump to the injector/throttle body through the pressurized supply line; do not add a crankcase pulse hose.

Do not copy routing from a different year simply because the model name is the same.

Match hose pressure rating, connector style, seals and routing clips to the exact fuel-system generation.

After service, prime/start the vehicle as appropriate and check every disturbed connection for leaks.

Common Express L6 hose-routing mistakes

Wrong-generation diagram

The same model name can span different gasoline engines and fuel systems.

Pulse routing on an EFI cart

EFI electric pumps do not use a crankcase pulse hose.

EFI hose on an older diagram

Do not assume newer connectors, pressure ratings or module layout apply to older carbureted versions.

Missing year/serial check

Use the exact serial/model code before ordering hose, fittings or pump parts.

Express L6 fuel hose and line layout

Pump/system: Current EFI / earlier gasoline routing can differ.

Engine/system: EX1-era EFI on current gasoline versions.

Routing: Current EFI: tank-area electric pump → pressurized line → EFI system; earlier gasoline routing should be matched to the model year.

Applies to: Multiple gasoline generations.

Model-specific note

Current gasoline Express L6 versions use EFI-era hardware. Older gasoline years can differ, so confirm the model year before following the current pressurized-line layout.

E-Z-GO Express L6 fuel hose FAQ

Does every gasoline E-Z-GO Express L6 use the same fuel-line routing?

No. The E-Z-GO Express L6 name spans gasoline generations, so the correct routing depends on model year, engine and fuel-system type.

How do I know which E-Z-GO Express L6 hose diagram to use?

Identify the exact serial/model code and gasoline engine first. Then use the matching official parts or service diagram.

How is an older carbureted E-Z-GO Express L6 typically routed?

Where a diaphragm-pump system is fitted, the usual path is tank to pump inlet, pump outlet to carburetor, plus a separate engine pulse/impulse line.

How is an EFI E-Z-GO Express L6 routed?

An EFI version uses a tank-area electric pump with a pressurized fuel line to the injector/throttle-body system; it does not use a crankcase pulse hose.

Can I copy routing from a different-year E-Z-GO Express L6?

Not safely without verification. Pump type, connectors, pressure rating and line routing can change even when the model name stays the same.

What should I verify before replacing E-Z-GO Express L6 fuel hose?

Confirm the exact year/engine, fuel-system type, hose pressure rating, connector style, seals, routing clips and fuel compatibility.

Verify with official documentation

Fuel-line routing, pump type, connectors and pressure requirements can vary by model year, engine and serial range. Before disconnecting or replacing any line, confirm the routing in the official owner, operator, parts or service manual for your exact E-Z-GO Express L6. For current documentation, visit the official manufacturer website.