Shot Scope PRO LX (1st Gen) Slope Settings

The Shot Scope PRO LX (1st Gen) has Slope-adjusted distance. Its listed slope control is Switch. Tournament use is listed as Yes — non-slope mode.

Shot Scope Rangefinder Slope Guide

Laser • Released 2022

YesHas slope
SwitchSlope control
Yes — non-slope modeTournament use
Slope-adjusted distanceDistance type

Does the Shot Scope PRO LX (1st Gen) have slope?

Yes

Yes. This model provides Slope-adjusted distance for uphill and downhill shots..

PRO LX (1st Gen) slope specifications

Slope compensation Yes
Slope system Slope-adjusted distance
Slope control Switch
Tournament use Yes — non-slope mode
Display Dual red/black optics

How slope works on this model

The PRO LX (1st Gen) uses Slope-adjusted distance.

The laser first measures the direct line-of-sight distance. The slope system then uses elevation information to estimate a playing distance.

Uphill shots generally receive a longer adjusted distance than the direct reading; downhill shots generally receive a shorter adjusted distance.

Official model-specific slope controls

Slide the slope indicator switch on the side forward or backward to turn slope on and off.

Slope is active when green is visible; slope is off when green is not visible.

Tournament use

The PRO LX (1st Gen) is listed as tournament legal when used with slope assistance switched off. Confirm the model is in its permitted non-slope configuration before competitive play.

Slope troubleshooting

Slope-adjusted distance is not appearing

Confirm slope is enabled using Switch, then re-range a target with a clear elevation change.

Slope will not turn off

Return the PRO LX (1st Gen) to its non-slope setting using Switch. Confirm the setting before competition.

Adjusted distance changes between readings

Re-acquire the same part of the target. A different aim point or measured angle can change the compensated result even when direct distance changes little.

Not sure which number is adjusted

The listed display is Dual red/black optics, but the exact slope screen layout is not published in the dataset. Use the model manual for the indicator/key.

Using slope correctly

Before competition, check the Switch and confirm the PRO LX (1st Gen) is in its non-slope configuration.
During practice, compare direct distance and adjusted distance on obvious uphill and downhill targets so you learn how much the model changes the playing number.
Tournament use is shown here as Yes — non-slope mode. The competition’s Local Rules still take priority.
The model is listed as Water resistant. Keep the slope/mode control area clean after wet-weather use so switches or buttons remain easy to operate.

Shot Scope PRO LX (1st Gen) slope FAQ

Does the Shot Scope PRO LX (1st Gen) have slope?

Yes. It is listed with Slope-adjusted distance.

How is slope controlled on the Shot Scope PRO LX (1st Gen)?

This model uses a dedicated slope switch.

Is the Shot Scope PRO LX (1st Gen) tournament legal?

The PRO LX (1st Gen) is listed as tournament legal when used with slope assistance switched off. Confirm the model is in its permitted non-slope configuration before competitive play.

What does slope do on the Shot Scope PRO LX (1st Gen)?

It combines direct laser distance with elevation information to estimate an adjusted playing distance.

Why can adjusted distance differ from direct distance?

Direct distance is the line-of-sight measurement. The adjusted value estimates how the elevation change alters the effective playing distance.

Verify the exact Shot Scope tournament setting before competition

Competition and Local Rules take priority. Model revisions can also change controls or indicators. Confirm the exact non-slope configuration on the official Shot Scope website or manual before competitive play. Visit Shot Scope.