The Nikon COOLSHOT PROII STABILIZED uses CR2 3V lithium. It uses a replaceable battery rather than an internal rechargeable cell.
Laser • Released 2021
What battery does the Nikon COOLSHOT PROII STABILIZED use?
Buy a fresh CR2 3V lithium battery. CR2 and CR123/CR123A are different physical sizes, so do not substitute one for the other.
COOLSHOT PROII STABILIZED battery at a glance
Replaceable battery
Replace the battery instead of charging it
No dependable model-specific figure
COOLSHOT PROII STABILIZED battery specifications
| Battery type | CR2 3V lithium |
|---|---|
| Battery system | Replaceable battery |
| Rechargeable | No |
| Charging port | Not applicable |
| Published battery life | Not reliably published |
Battery system explained
CR2 is a compact 3V lithium battery commonly used in laser rangefinders. It is not the same physical size as CR123/CR123A.
No dependable model-specific battery-life figure is listed. Disposable-cell life varies mainly with how often the laser is fired, battery quality, storage and temperature.
How to replace the battery
Battery life and what affects it
No dependable model-specific battery-life figure is listed. Disposable-cell life depends on battery quality, storage conditions, temperature and how often the laser is activated.
Battery troubleshooting
COOLSHOT PROII STABILIZED will not power on
Start with a fresh CR2 3V lithium battery and confirm the polarity shown inside the COOLSHOT PROII STABILIZED battery compartment. Because this model uses a replaceable cell, a known-good battery is the quickest way to rule out a power issue.
Fresh CR2 battery but still no power
Confirm the cell is CR2 rather than CR123/CR123A, then inspect the spring/contact surfaces for dirt, corrosion or a battery that is not seated fully under the cap.
Intermittent power after wet weather
The COOLSHOT PROII STABILIZED is listed as Waterproof. Even so, check the battery compartment and seal for moisture or debris before installing another battery.
Battery drains faster than expected
If the COOLSHOT PROII STABILIZED is consuming CR2 3V lithium cells unusually quickly, try a fresh reputable battery and inspect the compartment for moisture, corrosion or a cap that is not closing tightly.
Battery care and storage
Nikon COOLSHOT PROII STABILIZED battery FAQ
What battery does the Nikon COOLSHOT PROII STABILIZED use?
The listed battery specification is CR2 3V lithium.
Is the Nikon COOLSHOT PROII STABILIZED rechargeable?
No. This model is listed as using a replaceable battery rather than an internal rechargeable battery.
Can I use a CR123 battery in the Nikon COOLSHOT PROII STABILIZED?
No. This model is listed for CR2. CR2 and CR123/CR123A are different physical sizes.
How long does the Nikon COOLSHOT PROII STABILIZED battery last?
A dependable model-specific battery-life figure is not published in the data used here.
Why is my Nikon COOLSHOT PROII STABILIZED not turning on?
Install a known-good battery of the exact required type and confirm the polarity.
Battery type, charging port and power-system design can differ between similarly named rangefinders and regional versions. Before ordering a replacement battery or cable, confirm the exact model on the official Nikon website. Visit Nikon.