The Bushnell Pro X3+ uses CR2 3V lithium. It uses a replaceable battery rather than an internal rechargeable cell.
Laser • Released 2024
What battery does the Bushnell Pro X3+ use?
Buy a fresh CR2 3V lithium battery. CR2 and CR123/CR123A are different physical sizes, so do not substitute one for the other.
Pro X3+ battery at a glance
Replaceable battery
Replace the battery instead of charging it
No dependable model-specific figure
Pro X3+ battery specifications
| Battery type | CR2 3V lithium |
|---|---|
| Battery system | Replaceable battery |
| Rechargeable | No |
| Charging port | Not applicable |
| Published battery life | Not reliably published |
Battery system explained
CR2 is a compact 3V lithium battery commonly used in laser rangefinders. It is not the same physical size as CR123/CR123A.
No dependable model-specific battery-life figure is listed. Disposable-cell life varies mainly with how often the laser is fired, battery quality, storage and temperature.
How to replace the battery
Battery life and what affects it
No dependable model-specific battery-life figure is listed. Disposable-cell life depends on battery quality, storage conditions, temperature and how often the laser is activated.
Battery troubleshooting
Pro X3+ will not power on
Start with a fresh CR2 3V lithium battery and confirm the polarity shown inside the Pro X3+ battery compartment. Because this model uses a replaceable cell, a known-good battery is the quickest way to rule out a power issue.
Fresh CR2 battery but still no power
Confirm the cell is CR2 rather than CR123/CR123A, then inspect the spring/contact surfaces for dirt, corrosion or a battery that is not seated fully under the cap.
Intermittent power after wet weather
The Pro X3+ is listed as IPX7. Even so, check the battery compartment and seal for moisture or debris before installing another battery.
Battery drains faster than expected
If the Pro X3+ is consuming CR2 3V lithium cells unusually quickly, try a fresh reputable battery and inspect the compartment for moisture, corrosion or a cap that is not closing tightly.
Battery care and storage
Bushnell Pro X3+ battery FAQ
What battery does the Bushnell Pro X3+ use?
The listed battery specification is CR2 3V lithium.
Is the Bushnell Pro X3+ rechargeable?
No. This model is listed as using a replaceable battery rather than an internal rechargeable battery.
Can I use a CR123 battery in the Bushnell Pro X3+?
No. This model is listed for CR2. CR2 and CR123/CR123A are different physical sizes.
How long does the Bushnell Pro X3+ battery last?
A dependable model-specific battery-life figure is not published in the data used here.
Why is my Bushnell Pro X3+ not turning on?
Install a known-good battery of the exact required type and confirm the polarity.
Battery type, charging port and power-system design can differ between similarly named rangefinders and regional versions. Before ordering a replacement battery or cable, confirm the exact model on the official Bushnell website. Visit Bushnell.