The Cobra OPTM LS Driver uses a 57.5° lie-angle reference. Treat lie as a fitting variable alongside playing length, posture, strike and delivered face angle.
Driver • Released 2026
OPTM LS lie-angle overview
What stands out about the OPTM LS lie setup?
Treat the listed lie as a reference point, then confirm it dynamically from strike pattern and start direction.
Lie angle reference chart
| Club / option | Lie angle |
|---|---|
| Standard | 57.5° |
Dynamic lie test for the Cobra OPTM LS
Use a +1° lie setting as a controlled test when centred strikes start right. FutureFit33 provides lie adjustment, so compare results against the stock setting rather than guessing.
Start from the listed stock reference, establish centred contact and record start direction before changing the lie setting.
Use a −1° lie setting as a controlled test when centred strikes start left. Compare strike location and start direction before deciding whether the flatter setting is actually better.
Should the Cobra OPTM LS be more upright or flatter?
Try a more upright fit if…
- The stock lie reference is 57.5°. Your best-centred shots still launch/start right while the face delivery is otherwise repeatable.
- At the 57.5° stock lie reference, the toe is consistently down through impact rather than only at static address.
- The club is listed at 45.5 in; if that length suits you, an upright lie/setting test is more sensible than masking the fit by choking down.
- Use the model’s listed FutureFit33 · lie adjustable ±2° capability rather than bending the head; compare one controlled upright setting while keeping loft and face setup as consistent as possible.
Try a flatter fit if…
- With the listed 57.5° lie, centred strikes repeatedly start left and the heel is arriving lower than the toe.
- At 45.5 in playing length, the club feels too upright even with your normal hand height; shortening/choking down changes the effective fit, so test that separately from lie.
- Use the available FutureFit33 · lie adjustable ±2° range to compare a flatter setting before changing build length or grip position.
- The flatter test improves start direction while preserving the same centred strike location and launch window.
Lie angle probably is not the main problem if…
- Your centred shots behave normally from the listed 57.5° lie and the right/left miss changes mainly with face angle.
- You are not actually delivering the listed 45.5 in build consistently—for example, frequently choking down—so effective length should be standardised before judging lie.
- Strike location is moving heel-to-toe; lie conclusions from off-centre metalwood strikes are noisy.
- You are changing an adjustable hosel setting that also alters other delivered geometry; lock one FutureFit33 · lie adjustable ±2° setting before diagnosing lie.
Why playing length changes the lie fit
This model is listed at 45.5 in. Playing length changes posture and hand height, so dynamic lie should be re-checked after any length change.