Cobra Darkspeed One Length Hybrid Lie Angle Chart

The Cobra Darkspeed One Length Hybrid uses a 62.5° lie-angle reference. Treat lie as a fitting variable alongside playing length, posture, strike and delivered face angle.

Cobra Dynamic Lie Angle Guide

Hybrid/Rescue • Released 2024

62.5°Lie reference
62.5°Dynamic baseline
Not listedPlaying length
No lie adjustment listedAdjustment status

Darkspeed One Length Hybrid lie-angle overview

62.5°Lie reference
Not listedPlaying length
Single referenceProgression step
No lie adjustment listedAdjustment status

What stands out about the Darkspeed One Length Hybrid lie setup?

Treat the listed lie as a reference point, then confirm it dynamically from strike pattern and start direction.

Lie angle reference chart

Club / option Lie angle
Standard 62.5°

Dynamic lie fit for the Cobra Darkspeed One Length Hybrid

More uprightFit direction

If centred strikes consistently start right, compare a more upright compatible setting, build or head option. Do not assume a fixed metalwood or hybrid can simply be bent.

62.5°Stock reference

Start from the listed lie reference and judge the result from centred contact, start direction and your normal address posture.

FlatterFit direction

If centred strikes consistently start left, compare a flatter compatible setting, build or head option. Avoid physically bending the club unless Cobra or a qualified fitter confirms it is safe.

Should the Cobra Darkspeed One Length Hybrid be more upright or flatter?

Try a more upright fit if…

  • The stock lie reference is 62.5°. Your best-centred shots still launch/start right while the face delivery is otherwise repeatable.
  • At the 62.5° stock lie reference, the toe is consistently down through impact rather than only at static address.
  • Your playing length and posture are already comfortable, so a more upright compatible setup is the next clean variable to compare.
  • This model has no lie adjustment listed, so compare a fitter-approved build/head option rather than assuming the hosel can safely be bent.

Try a flatter fit if…

  • With the listed 62.5° lie, centred strikes repeatedly start left and the heel is arriving lower than the toe.
  • The club sits too upright with your natural hand height even when ball position and posture are stable.
  • Because no lie adjustment is listed, test a flatter-compatible build or different head rather than forcing a bend into a fixed metalwood/hybrid.
  • The flatter test improves start direction while preserving the same centred strike location and launch window.

Lie angle probably is not the main problem if…

  • Your centred shots behave normally from the listed 62.5° lie and the right/left miss changes mainly with face angle.
  • Your effective playing length changes from swing to swing because grip position or posture is inconsistent.
  • Strike location is moving heel-to-toe; lie conclusions from off-centre metalwood strikes are noisy.
  • The miss disappears when face delivery is neutral, pointing to swing/face control rather than the fixed lie reference.

Why playing length changes the lie fit

Playing length is not listed in the supplied specification set. Because length changes posture and hand height, re-check dynamic lie if the club is built shorter or longer than standard.

Verify before changing a clubGolf-club specifications can differ by model year, loft, region, custom build and hosel setting. Before buying, fitting or altering a club, compare these figures with Cobra’s specifications for your exact model. Do not bend a fixed head or hosel unless Cobra or a qualified fitter confirms that adjustment is safe. Verify with Cobra.