The Cobra King Cobra Oversize Tour Iron lie-angle progression spans 60°–63.5°. The listed progression runs from 3 at 60° to PW at 63.5°. Use these figures as a starting point for address fit, centred contact and dynamic lie testing.
Iron • Released 1996
King Cobra Oversize Tour lie-angle overview
What stands out about the King Cobra Oversize Tour lie setup?
The listed lie values span 3.5° across the model.
The most common progression step is about 0.5°.
The short-iron end deserves the closest dynamic check because greater loft can magnify the directional effect of the same lie error.
Lie angle reference chart
| Club / option | Lie angle |
|---|---|
| 3 | 60° |
| 4 | 60.5° |
| 5 | 61° |
| 6 | 61.5° |
| 7 | 62° |
| 8 | 62.5° |
| 9 | 63° |
| PW | 63.5° |
Lie progression visual
Dynamic lie test for the Cobra King Cobra Oversize Tour
Test this only with a qualified fitter and only if the head or hosel can be safely adjusted. Use centred strikes and start direction to judge whether a more upright lie actually helps.
Start here, establish centred contact and record start direction before making any physical lie-angle change.
Test this only with a qualified fitter and only if the head or hosel can be safely adjusted. Keep the change only if strike quality and start direction improve together.
Should the Cobra King Cobra Oversize Tour be more upright or flatter?
Try a more upright fit if…
- The stock progression runs from 3 at 60° to PW at 63.5°. If the 3 and mid-set clubs both arrive toe-down, the pattern is more convincing than a single-club miss.
- Around the fitting baseline of 7 at 62°, centred strikes repeatedly start right while face delivery is stable.
- Your playing lengths and posture are already confirmed, so the repeated toe-down pattern is less likely to be a length problem.
- Because the set spans 3.5° of lie progression, check at least a long/mid club and a short club before applying the same upright change across the whole set.
Try a flatter fit if…
- With the stock progression from 3 at 60° to PW at 63.5°, heel-down contact appears in more than one part of the set rather than only in the most upright short club.
- At 7 at 62°, centred shots repeatedly start left and a flatter test improves start direction without shifting strike off centre.
- Your normal hand height puts the sole heel-down even after playing length has been checked.
- The short end reaches PW at 63.5°; don’t flatten the whole set solely because the most upright club looks heel-down at static address—confirm it dynamically.
Lie angle probably is not the main problem if…
- The long-to-short progression of 60°–63.5° produces centred contact and predictable starts through the set.
- Only the PW or one isolated club looks wrong; measure that club against its listed 63.5° spec before changing the entire set.
- Start direction changes mainly when face-to-path changes, while comparable centred swings do not show a consistent lie-related bias.
- Playing length or posture is still being changed, so the dynamic lie result is not yet stable enough to act on.
Why playing length changes the lie fit
Playing length is not listed in the supplied specification set. Because length changes posture and hand height, re-check dynamic lie if the club is built shorter or longer than standard.