The Callaway Steelhead X-14 Irons lie angles run from 58°–64°, with the listed heads spanning 58° to 64°.
Irons • Released 2000
Steelhead X-14 lie-angle fingerprint
What stands out about the Steelhead X-14 lie setup?
The Steelhead X-14 runs from 58° at the 2i to 64° at the 9-iron.
Lie steps vary from 0.5° to 1°, so the progression is not perfectly uniform.
For dynamic fitting, 7-iron at 62° is the best central reference.
Higher-loft short irons are more directionally sensitive to the same lie error, so check the fit through the set instead of relying on only one club.
Any lie change should be made by a qualified fitter with a loft-and-lie machine.
Factory lie angle chart
| Club / head | Lie | Step | Pattern |
|---|---|---|---|
| 2i | 58° | — | Starting lie |
| 3-iron | 59° | +1° | Typical step |
| 4-iron | 60° | +1° | Typical step |
| 5-iron | 60.5° | +0.5° | Smaller step |
| 6-iron | 61° | +0.5° | Smaller step |
| 7-iron | 62° | +1° | Typical step |
| 8-iron | 63° | +1° | Typical step |
| 9-iron | 64° | +1° | Typical step |
Lie progression visual
Steelhead X-14 directional effect from a 1° lie error
Dynamic lie test for the Callaway Steelhead X-14 7-iron
Test only if the head is safe to bend and dynamic evidence points upright.
Record strike and start direction before changing anything.
Keep setup and ball position consistent so the comparison is meaningful.
Should the Callaway Steelhead X-14 be more upright or flatter?
Test more upright when…
- Toe is consistently down at impact
- Centred shots start right despite stable delivery
Test flatter when…
- Heel is consistently down at impact
- Centred shots start left despite stable delivery
Do not change lie just because…
- Strike pattern is inconsistent
- Playing length or face/path is the real issue
Playing length reference
| Club / head | Length |
|---|---|
| 2i | 39.5 in |
| 3-iron | 39 in |
| 4-iron | 38.5 in |
| 5-iron | 38 in |
| 6-iron | 37.5 in |
| 7-iron | 37 in |
| 8-iron | 36.5 in |
| 9-iron | 36 in |
Because these heads use different playing lengths, judge dynamic lie with the actual club being fit rather than applying one correction across the family.
Dynamic lie changes with delivery, shaft deflection, playing length and setup. If a Callaway wood or hybrid is adjustable, use only the documented hosel positions for that exact head. For irons, use a qualified club fitter before bending. Visit Callaway Golf.