The Callaway RAZR Edge Irons lie angles run from 60°–64°, with the listed heads spanning 60° to 64°. The supplied lie data is marked as estimated, so use it as a reference and verify the exact head before any permanent change.
Irons • Released 2013
RAZR Edge lie-angle fingerprint
What stands out about the RAZR Edge lie setup?
The RAZR Edge runs from 60° at the 4-iron to 64° at the SW.
Lie steps vary from 0.5° to 0.75°, so the progression is not perfectly uniform.
There are 2 repeated lie values.
For dynamic fitting, 7-iron at 62.25° is the best central reference.
The supplied lie values are marked as estimated, so treat them as a reference rather than confirmed factory measurements.
Higher-loft short irons are more directionally sensitive to the same lie error, so check the fit through the set instead of relying on only one club.
Any lie change should be made by a qualified fitter with a loft-and-lie machine.
Estimated lie angle reference
| Club / head | Lie | Step | Pattern |
|---|---|---|---|
| 4-iron | 60° | — | Starting lie |
| 5-iron | 60.75° | +0.75° | Typical step |
| 6-iron | 61.5° | +0.75° | Typical step |
| 7-iron | 62.25° | +0.75° | Typical step |
| 8-iron | 63° | +0.75° | Typical step |
| 9-iron | 63.5° | +0.5° | Smaller step |
| PW | 64° | +0.5° | Smaller step |
| AW | 64° | 0° | Same lie |
| SW | 64° | 0° | Same lie |
Estimated lie progression visual
RAZR Edge directional effect from a 1° lie error
Dynamic lie test for the Callaway RAZR Edge 7-iron
Test only if the head is safe to bend and dynamic evidence points upright.
Record strike and start direction before changing anything.
Keep setup and ball position consistent so the comparison is meaningful.
Should the Callaway RAZR Edge be more upright or flatter?
Test more upright when…
- Toe is consistently down at impact
- Centred shots start right despite stable delivery
Test flatter when…
- Heel is consistently down at impact
- Centred shots start left despite stable delivery
Do not change lie just because…
- Strike pattern is inconsistent
- Playing length or face/path is the real issue
Playing length reference
| Club / head | Length |
|---|---|
| 4-iron | 38.5 in |
| 5-iron | 38 in |
| 6-iron | 37.5 in |
| 7-iron | 37 in |
| 8-iron | 36.5 in |
| 9-iron | 36 in |
| PW | 35.75 in |
| AW | 35.5 in |
| SW | 35.25 in |
Because these heads use different playing lengths, judge dynamic lie with the actual club being fit rather than applying one correction across the family.
Dynamic lie changes with delivery, shaft deflection, playing length and setup. If a Callaway wood or hybrid is adjustable, use only the documented hosel positions for that exact head. For irons, use a qualified club fitter before bending. Visit Callaway Golf.