Callaway Quantum Mini Spinner Fairway Wood Lie Angle Chart

The Callaway Quantum Mini Spinner Fairway Wood lie angles run from 60.5°–61.5°, with the listed heads spanning 60.5° to 61.5°.

Callaway Dynamic Lie Angle Guide

Fairway Wood • Released 2026

60.5°–61.5°Lie reference
9W 61°Dynamic baseline
41.25–42.25 inPlaying length
No lie adjustment listedAdjustment status

Quantum Mini Spinner lie-angle fingerprint

60.5°–61.5°Lie reference
41.25–42.25 inPlaying length
0.5°Lie step pattern
No lie adjustment listedAdjustment status

What stands out about the Quantum Mini Spinner lie setup?

The Quantum Mini Spinner runs from 60.5° at the 7W to 61.5° at the 11W.

Every meaningful lie step is 0.5°, giving this model a very consistent progression.

For dynamic fitting, 9W at 61° is the best central reference.

For this fairway wood, lie is mainly a strike, sole-contact and address-fit variable; face angle and face-to-path still dominate large directional misses.

The supplied specs do not document a user-adjustable lie setting. Check the exact Callaway head before assuming it is adjustable or bendable.

Factory lie angle chart

Club / head Lie Step Pattern
7W 60.5° Starting lie
9W 61° +0.5° Typical step
11W 61.5° +0.5° Typical step

Lie progression visual

Listed lie angles across this exact Callaway model.
7W
60.5°
9W
61°
11W
61.5°

Quantum Mini Spinner directional effect from a 1° lie error

Geometric face-plane direction estimate using this model’s listed lofts. It is not predicted curvature or yards offline.
7W
0.38°
9W
0.45°
11W
0.51°
Most lie-sensitive listed club: 11W at about 27° loft — roughly 0.51° of face-plane direction change from a 1° lie error.

Should the Callaway Quantum Mini Spinner be more upright or flatter?

A more upright fit may help when…

  • A fitter confirms the current head fits too flat dynamically
  • Another factory build gives better centre contact

A flatter fit may help when…

  • A fitter confirms the current head fits too upright dynamically
  • Another factory build gives better centre contact

Do not change lie just because…

  • You plan to bend a wood / hybrid without model-specific approval
  • You have no repeatable strike baseline

Playing length reference

Club / head Length
7W 42.25 in
9W 41.75 in
11W 41.25 in

Because these heads use different playing lengths, judge dynamic lie with the actual club being fit rather than applying one correction across the family.

Verify the exact Callaway specification before changing lie angle

Dynamic lie changes with delivery, shaft deflection, playing length and setup. If a Callaway wood or hybrid is adjustable, use only the documented hosel positions for that exact head. For irons, use a qualified club fitter before bending. Visit Callaway Golf.