Titleist Original 1984 Metal Woods — Fairway Lie Angle Chart

The Titleist Original 1984 Metal Woods — Fairway lie angles run from 55°–57°, moving from Option 1 at 55° to Option 3 at 57°.

Titleist Dynamic Lie Angle Guide

Fairway Wood • Released 1984

55°–57°Lie reference
Option 2 56°Dynamic baseline
Fixed headAdjustment route
MediumEvidence grade

Original 1984 Metal Woods — Fairway lie-angle fingerprint

55°–57°Lie reference
41.5–42.5 inPlaying length
Fixed headAdjustment route
MediumEvidence grade

What stands out about the Original 1984 Metal Woods — Fairway lie setup?

The Original 1984 Metal Woods — Fairway moves from 55° at the Option 1 to 57° at the Option 3 — a total progression of .

Every meaningful lie step is .

For dynamic fitting, Option 2 at 56° is the best central reference.

For a fairway wood, lie fit is most useful for centre contact and address fit rather than as a cure for a large left/right miss.

Treat the head as fixed for lie unless Titleist documents an indexed adjustment system for the exact version.

Factory lie angle chart

Club / head Lie Step Pattern
Option 1 55° Starting lie
Option 2 56° +1° Typical step
Option 3 57° +1° Typical step

Lie progression visual

The listed lie progression for this exact Titleist model.
Option 1
55°
Option 2
56°
Option 3
57°

Original 1984 Metal Woods — Fairway directional effect from a 1° lie error

Geometric face-plane direction estimate using this model’s listed lofts. This is not predicted curvature or yards offline.
15° loft
0.27°
18° loft
0.32°
21° loft
0.38°
Most lie-sensitive listed loft: 21° — about 0.38° of face-plane direction change from a 1° lie error.

Should the Titleist Original 1984 Metal Woods — Fairway be more upright or flatter?

A more upright fit may help when…

  • A fitter confirms the fixed head fits too flat dynamically
  • Another factory build produces better centre contact

A flatter fit may help when…

  • A fitter confirms the fixed head fits too upright dynamically
  • Another factory build produces better centre contact

Do not change lie just because…

  • You plan to bend a fixed wood / hybrid head
  • You have no repeatable strike baseline

Playing length reference

Club / head Length
42.5 in
42 in
41.5 in

Because these heads use different playing lengths, judge dynamic lie with the actual club being fit rather than applying one lie correction across the whole family.

Verify the exact Titleist specification before changing lie angle

Dynamic lie changes with delivery, shaft deflection, playing length and setup. For SureFit metals, use the Titleist chart for the exact category and handedness. For irons, wedges and putters, use a qualified fitter or putter technician before bending. Titleist SureFit guide.