The Mizuno ST-Z 230 Fairway fairway wood lie angles run from 58°–59°. The model’s lie progression spans 1° with lie steps of 1°.
Fairway Wood • Released 2023
ST-Z 230 Fairway lie-angle fingerprint
What stands out about the ST-Z 230 Fairway lie setup?
The ST-Z 230 Fairway moves from 58° in the 3-wood to 59° in the 5-wood, a total lie progression of 1°.
The progression is unusually consistent: each meaningful step is about 1°.
For fitting, the 5-wood at 59° is the most useful mid-set reference before checking the rest of the set.
For this fairway-wood family, lie fitting is more about strike pattern, delivery and address fit than creating a large left/right correction.
Any lie change should come only from the indexed Mizuno hosel positions supported by this exact adapter.
Factory lie angle chart
| Club | Lie | Step | Progression |
|---|---|---|---|
| 3-wood | 58° | — | Starting lie |
| 5-wood | 59° | +1° | Typical step |
ST-Z 230 Fairway directional effect from a 1° lie error
Where to focus your dynamic lie test on the ST-Z 230 Fairway
Use 5-wood at 59° as the baseline because it gives a representative mid-set delivery check.
5-wood (18° loft), 3-wood (15° loft). Their higher loft makes the same lie error more directionally visible.
3-wood (15° loft), 5-wood (18° loft). Use them to confirm the fit still works through the long end of the set.
Dynamic lie test for the Mizuno ST-Z 230 Fairway
Use only an indexed Mizuno sleeve position. Compare centre strike, start line and launch against neutral.
Mark the starting sleeve position and hit a repeatable baseline group before changing the hosel.
If the sleeve provides a flatter relationship, compare it using the same tee height, ball position and target.
How to evaluate the Mizuno ST-Z 230 Fairway dynamic lie fit
Use the factory or neutral hosel position as the baseline.
Track repeated strike location rather than judging one heel or toe strike.
Separate start direction from curvature. A face / path problem is not automatically a lie problem.
Use indexed adapter settings where available. Do not bend a fixed wood or hybrid head.
Should the Mizuno ST-Z 230 Fairway be more upright or flatter?
A more upright fit may help when…
- A supported upright setting improves centre strike
- Start line improves without adding unwanted curvature
- Dynamic delivery is consistently toe-down
A flatter fit may help when…
- A supported flatter setting improves centre strike
- Start line improves without hurting launch
- Dynamic delivery is consistently heel-down
Do not change lie just because…
- You are trying to cure a slice / hook without face-path data
- You skipped the neutral baseline
- You are copying another Mizuno adapter chart
Can the Mizuno ST-Z 230 Fairway lie angle be adjusted?
Use the markings on the exact adapter fitted to this club. Printed positions and loft / lie relationships can differ between Mizuno generations.
Why shaft length can change the lie fit
Playing length changes posture, hand height and delivery, so the same static lie can fit differently after a length change. Re-test dynamic lie after changing playing length rather than automatically adding or subtracting a fixed number of lie degrees.
Static lie is only the starting specification. Dynamic lie changes with delivery, shaft deflection, playing length and setup. Mizuno states that iron lie adjustment varies by model and material, while drivers and fairway woods are not bent for loft or lie. Before bending a club or rotating an indexed hosel, confirm the instructions for your exact model with Mizuno or a qualified fitter. Mizuno custom specifications.