The Mizuno T7 wedge lie angle is best treated as an approximate 63°–64° historical fitting reference. Exact lie can vary by loft, build and surviving historical specification, so use the range as a starting point and confirm the club dynamically.
Wedge • Released 2017
T7 lie-angle fingerprint
What stands out about the T7 lie setup?
This model is best treated as a 63°–64° lie range rather than a precise club-by-club progression.
Because this is a wedge, dynamic lie matters heavily on partial shots as well as full swings: a small directional bias can be more noticeable when the target is close and launch is high.
This model’s lie changes should be made with a loft-and-lie machine, not by hand.
Lie angle reference
| Approximate historical lie range | 63°–64° |
|---|---|
| How to use it | Use this as a fitting reference, not as an exact model-by-model hosel chart. |
Lie range visual
Dynamic lie fit for the Mizuno T7
Use the published / historical lie reference as a fit baseline only.
Check centred impact, start line and delivery before blaming lie angle.
If the lie fit is clearly wrong, compare another head or a supported adjustable Mizuno model.
How to measure dynamic lie on the Mizuno T7
Use a washable marker to draw a straight vertical line on the back of the ball facing the club.
Keep ball position and setup consistent. Ignore obvious toe / heel mishits because strike can distort the reading.
Top of the line leaning toward the toe generally points to a lie that is too upright; top leaning toward the heel generally points to a lie that is too flat.
Use launch direction, strike pattern and a fitter / launch monitor to confirm the pattern before bending.
Should the Mizuno T7 be more upright or flatter?
Test more upright when…
- Full-swing testing shows consistent toe-down delivery
- Centred wedge shots repeatedly start right
- Heel / toe interaction is confirmed dynamically
Test flatter when…
- Partial shots repeatedly start left with centred contact
- Heel sits / enters turf first on repeatable delivery
- A flatter test improves short-game start line
Do not change lie just because…
- You are copying your iron lie without testing wedge shots
- The miss comes from face control or ball position
- You would need a large bend on an older head
Can the Mizuno T7 lie angle be adjusted?
This is in a forged / forge-friendly family, which is generally more suitable for professional bending. The fitter should measure current lie, inspect the hosel, bend in small increments and re-measure. Historical heads need extra caution because age and previous bending history matter.
Why shaft length can change the lie fit
Playing length changes posture, hand height and delivery, so the same static lie can fit differently after a length change. Re-test dynamic lie after changing playing length rather than automatically adding or subtracting a fixed number of lie degrees.
Static lie is only the starting specification. Dynamic lie changes with delivery, shaft deflection, playing length and setup. Mizuno states that iron lie adjustment varies by model and material, while drivers and fairway woods are not bent for loft or lie. Before bending a club or rotating an indexed hosel, confirm the instructions for your exact model with Mizuno or a qualified fitter. Mizuno custom specifications.