The Mizuno ST200 Fairway is a fairway wood and is not user-adjustable. There is no indexed loft sleeve to rotate; the listed loft is a factory reference rather than an adjustment setting.
Fairway Wood • Released 2020
How to adjust the Mizuno ST200 Fairway
Look for a sole screw plus an indexed sleeve between the shaft and head. Use a torque wrench and only the marked sleeve positions.
If the shaft enters a plain bonded hosel with no indexed sleeve, there is no owner loft adjustment. Do not try to bend the head.
What loft changes do to the ST200 Fairway ball flight
| Change | Launch | Spin | Carry / gap | Roll | Best for |
|---|---|---|---|---|---|
| Add loft | Higher / easier | Usually more | Slightly shorter | Less | Player struggling to launch from turf or hold greens |
| Reduce loft | Lower / stronger | Usually less | Potentially longer | More | Player flighting it too high or creating distance overlap |
Who should adjust the Mizuno ST200 Fairway?
Worth adjusting when…
- You have confirmed your exact head uses Quick Switch
- You want easier launch or a flatter, stronger flight from the same head
- You can test carry and turf performance after each setting change
Do not adjust just because…
- You have not confirmed whether your version is adjustable
- You are trying to force a fixed hosel to move
- Your main problem is strike quality rather than launch or gapping
Best starting point for the Mizuno ST200 Fairway
First confirm whether your exact head is the Quick Switch version. If it is, begin at neutral and move one indexed setting at a time. If it is fixed-hosel, stop there: there is no owner loft adjustment.
Factory loft reference
| Club / head | Loft |
|---|---|
| 3-wood | 15° |
| 5-wood | 18° |
| 7-wood | 21° |
Adapter markings, torque requirements, loft / lie relationships and safe bending limits vary by model, generation and head construction. Before rotating a sleeve or bending a club, confirm the instructions for your exact head with Mizuno or a qualified fitter. Visit the official Mizuno Golf website.