The Cobra King F6 Hybrid runs from 39.75 in (101 cm) for the 4-5H to 41.25 in (104.8 cm) for the 2-3H.
Cobra King F6 Hybrid length chart
Playing length in inches and centimetres.
| Club | Length (in) | Length (cm) |
|---|---|---|
| 2-3H | 41.25 in | 104.8 cm |
| 3-4H | 40.5 in | 102.9 cm |
| 4-5H | 39.75 in | 101 cm |
Measurements are shown exactly as structured in the master length field, with centimetres converted from inches.
Length progression
A quick visual of the listed length progression within this model.
King F6 Hybrid club lengths
Bars show the relative progression within this model, not a comparison with other clubs.
What the numbers mean
Playing length is a build specification, not a universal fitting target.
Length and setup information
A cleaner build snapshot of the model details and paired spec information.
Core model details
Loft and lie setup
About this length data
Cobra King F6 Hybrid length FAQs
What is the King F6 Hybrid length range?
The listed lengths run from 39.75 in (101 cm) to 41.25 in (104.8 cm), a total spread of 1.5 in (3.81 cm). The longest listed club is 2-3H and the shortest is 4-5H.
How long is the King F6 Hybrid 3-4H?
The listed 3-4H playing length is 40.5 in (102.9 cm). Across this model, that sits 0.75 in below the longest listed club.
How does length change through the King F6 Hybrid set?
The listed progression generally gets shorter as loft increases. The typical step between adjacent listed clubs is about 0.75 in (1.91 cm), with a full longest-to-shortest change of 1.5 in.
How do loft and length relate in the King F6 Hybrid set?
For the matched entries in this dataset, 2-3H is 16° at 41.25 in (104.8 cm), while 4-5H is 22° at 39.75 in (101 cm). That shows the actual model-specific loft/length progression rather than a generic fitting rule.
Is the King F6 Hybrid length a model-specific factory-published figure?
Not in the source record used here. The master dataset flags the length as reconstructed from the nearest Cobra family/generation standard because a complete model-specific factory length table was not available. Treat it as a reference value and verify before cutting or ordering a shaft.